|
|
|
DIAPHRAGM VALVE |
|
|
Diaphragm valve is recommended for application involving slurries, fluids with suspended solids, corrosive fluids etc. This valves provide tight
shut off and are primarily designed for on-off services. Diaphragm valves give best services to water, chemicals, gases, oils, acids.
Am tech make-125,150 Cast iron, Cast Steel,
SS alloys diaphragm valves bolted bonnet with ANSI B 16.5. |
| |
| TECHNICAL DESCRIPTION |
| SIZES: |
1/2" TO 8" (15mm to 200 mm) |
| Type: |
Weir- A & Straight way type. |
| MATERIAL OF CONSTRUCTIONS: |
ASTMA 216 Gr WCB, CI TO IS 210 Gr.FG 220, AISI 304 (CF 8),
AISI-316 (CF 8 M),
SS 316 L (A 351 CF 3C
& CF3 M) unlined or lined. |
| LINING MATERIAL: |
Natural Rubber, Ebonite, Neoprene,
Glass, Teflon, EPDM. |
| BODY DIAPHRAGM: |
Neoprene, Nitrile, Silicon,
EPDM,Viton,Teflon. |
| OPERATION: |
Manually Handle operated, Gear operated. |
| END CONNECTION: |
Screwed End : BSP, NPT, Socket
Weld, Tri Clamp,
Flanged End : Confirming to BS 5156 flanged to ANSI B 16.5 Class 125/150.
Drilling as per
BS Table 10 D, E, F, DIN,
PN 10,ASA 125. |
|
| | |
|
