| AMTECH FORGED GATE VALVE OUTSIDE SCREWED &YOKE TYPE SEAL WELD DESIGN –ASA 1500# & 2500# |
| MFG STD : |
API 602 |
| TESTING & INSPECTION STD : |
API 598/BS 6755 PART 1 |
| END CONNECTION : |
SCEWED TO BSP ,BSPT,NPT FEMAIL ,S/W TO ANSI B 16.11 |
| BODY : |
FORGED A 105, FORGED A 182 (F 304), FORGED A 182 (F 316), FORGED A 182 (F 304L), FORGED A 182 (F 316L), FORGED A 182 F22 /FORGED A 182 F11 |
| SEATRING : |
AISI 304 /AISI 316/AISI 410/AISI 304L/AISI 316L |
| WEDGE : |
AISI 304 /AISI 316/AISI 410/AISI 304L/AISI 316L |
| STEM : |
AISI 410/AISI 304/AISI 316/AISI 304L/AISI 316L |
| GASKET : |
SPIRAL WOUND SS 304 WITH CAF FILLER |
| BONNET : |
FORGED A 105, FORGED A 182 (F 304), FORGED A 182 (F 316), FORGED A 182 (F 304L), FORGED A 182 (F 316L), FORGED A 182 F22 /FORGED A 182 F11 |
| BODY STUD / NUT : |
ASTM A 193 GR. B7/STAINLESS STEEL ASTM A 194 GR. 2H/STAINLESS STEEL |
| CAP HEAD SCREW |
CARBON STEEL |
| WASHER : |
CARBON STEEL |
| EYE BOLTS/NUTS |
CARBON STEEL |
| GLAND PACKING |
ASBESTOS GRAPHITED WITH INCONEL WIRE |
| GLAND BUSH |
AISI 410/AISI 316/AISI 304 |
| GLAND PLATE : |
CARBON STEEL |
| YOKE SLEEV : |
AISI 304/AISI 316/EN 19 |
| HAND WHEEL: |
FOR 1500#:BODY:3250 PSIG (228 KG /CM2 )5400PSIG |
| HYD–TEST PRESSURE : |
FOR 2500 # -HYDRAULIC TET PRESSURE -: BODY : 9000 PSIG( 630 KG /CM2 ),SEAT : 6600 PSIG ( 462 KG /CM2 ) |
| SIZE - RANGE : |
15 MM TO 40 MM |
| ACCESSORIES : |
MANUAL GEAR BOX OPERATION/ MOTORIZED OPERATION |
